A LEADING PARTNERSHIP IN PUMPS

brinkman-pumps_clip_image004

Immersion Pumps TB16...STA2000

Single stage immersion pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container. The pump extension being immersed in the coolant

3

Quick Suctioning Immersion Pumps TL50...SAL2000

Equipped with the patented Brinkmann’s suction de-aeration system are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps attain stable working conditions as soon as the liquid level reaches the suction inlet. All types are also available as suction immersion pump (TAS/STS).

5

Quick Suctioning Immersion Pumps TGL331...SGL1103

Quick suctioning immersion pumps series SGL equipped with the patented Brinkmann’s suction de-aeration system are excellently suited to pumping extremely inflated fluids (grinding oils) as they occur in high speed grinding. The quick suctioning immersion pumps attain stable working conditions as soon as the liquid level reaches the suction inlet.

7

Immersion Pumps TS12...TM26

Models TS12 to TM26 are suitable for NC machine tools featuring coolant supply through the tool holder or driving spindle or equipped with internally cooled tool. These pumps are fitted with a peripheral impeller to achieve a compact high pressure unit. Series TS/TM are suitable for filtered coolant only

8

Immersion Pumps Pressure Boosting Pumps TH45...TH360/FH45...FH360

Series TH/FH using closed impellers minimise power consumption by optimum hydraulic efficiency. Thus series TH offer high pressure although having small depth of immersion. In combination with pre-pumps or central coolant supply series FH work as pressure booster up to 26 bar increase. Series TH/FH are suitable for filtered coolant only.

12

High Pressure Immersion Pumps Screw Spindles BS/TBS

High pressure is provided by our screw pumps using long-wearing silicon carbide capsules and high strength screw spindles. Screw pumps are optimal for pumping filtered greasing fluids such as coolants (oils and emulsions with at least 3% content). Due to their construction principle, the Bs/TBS series of pumps work with force. To prevent explosion they need a pressure-limiting valve to carry back unused coolant into the tank. These valves are adjusted to the maximum allowed pressure of the pump in the factory. screw pumps of the Bs/TBS should not be used without fluid.

2

Immersion Pumps TE142...STA1303

Multi stage immersion pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container. The pump extension being immersed in the coolant. All types are also available as quick suctioning immersion pumps equipped with Brinkmann’s suction de-aeration system.

4

Quick Suctioning Immersion Pumps SFL650...SFL1850

Quick suctioning immersion pumps series SFL equipped with the patented Brinkmann’s suction de-aeration system are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps attain stable working conditions as soon as the liquid level reaches the suction inlet. Special materials of construction for increased wear resistance are available upon request.

6

Free Flow-Immersion Pumps Vortex Pumps FT35...SFT1100

Free flow-immersion pumps series FT/SFT are provided to lift coolant for filtering. Coarse shreds can be transported together with liquids. Inside slot of pump has same dimension as output pipe. The cantilever design pumps (-C) and models with slurping capablity (-CL) are available upon request.

10

Immersion Pumps in Plastic KTF25...KTF303

Plastic immersion pumps series KTF are suitable for various water supply problems. Chemical liquids can be used upon request.

13

Immersion Pumps TC25...TC160

Our multi stage pump versions TC25-TC160 have been especially developed for supplying internally cooled tools with coolant fluid. The use of closed impellers gives optimum hydraulic efficiency while minimising power consumption. Series TC are suitable for filtered coolant only.

11

Min. Centrifugal Pumps Suction Pumps KC21...SB60/KB41...KB51 Min. Centrifugal Pumps B401...B501/B21...B32

Miniature centrifugal pumps series, KB, KC and SB are suitable for pumping thin-bodied fluids. With the exception of models KB41 and KB51, they operate according to the bypass duct principle with self-priming function following initial priming. Miniature centrifugal pumps series B401...501 are suitable for pumping clean fluids up to 140º temperature and 5 bar system pressure.